DTT vinyl Decals, and die-cut masking etc.....

I got a set form Louis too. If your in Canada expect 2 weeks minimum to get them. He posted them right after I paid, they got to border like 2 days later according to the post marks, then they sat in customs for like 9 days. Good old Canada customs, got to make sure we don't get anything speedy. Decals are great and I can't wait until the weather warms up enough to paint the bike and get them on.

Cheers.

Maritime.
 
Maritime Biker said:
I got a set form Louis too. If your in Canada expect 2 weeks minimum to get them. He posted them right after I paid, they got to border like 2 days later according to the post marks, then they sat in customs for like 9 days. Good old Canada customs, got to make sure we don't get anything speedy. Decals are great and I can't wait until the weather warms up enough to paint the bike and get them on.

Cheers.

Maritime.
Click to expand...

This is good info! Thanks for the heads up.... Glad you like them

Take care, ride safe!

Louis
 
Do you have silver checks? Got a carbon tank, seat, and fender and want the carbon to show through and have silver checks down the middle of the tank, seat, and fender. Also can these be covered with epoxy resin? Thanks.
 
Gage Werke Composites said:
Do you have silver checks? Got a carbon tank, seat, and fender and want the carbon to show through and have silver checks down the middle of the tank, seat, and fender. Also can these be covered with epoxy resin? Thanks.
Click to expand...


I have silver(metalic). Though I would have to do it in like 2 3' lengths. Because I don't have enough linear footage to do it in one piece.

As far as the resin goes. I'm not real sure. I could send a scrap w/ the decals so you can do a test run...

Thanks for your interest, Louis
 
Hi..., I'm intrested in ordering a set of 2"x3" japanese suns, 4 Black DTT 4" and 2 Lucky 13's white 3.5" or 4". Let me know the total amount and payment method, zipcode 00969. Thank's and regards from PR.
 
Ok here are the Decals I got from Louis, ignore the windshield, it is for when I ride the bike to NH and it will come off as soon as I get there. It helps for long trips at Highway sppeds. Also the polish job on the motor has gone to sh$t and i have to re do it cause it got salt all over it in a rainy day in April. But the Decals are great!
 
Resin over the vinyl worked great. Used epoxy resin. Didn't try polyester. Probably wouldn't be coating carbon with polyester though. PM sent to ya. Got a couple questions
 
Picture032.jpg
Picture031.jpg
Picture030.jpg
 
Now that's way cool! You don't see that everyday. So Sweeeeeeet!!!!!Did you brush the resin on?
 
No, you could though. I like it nice and thick so I can wet sand and buff to a glass like finish. I just pour it on nice and thick and let the excess drip off. Then I finish sand the edges and start wet sanding. Gotta make sure you spray the resin with acetone while it's curing to get rid of the air bubbles.
 
Can you do a silver or chrome? I want a set of the smaller 160 style tank emblems made up. I can shoot you a pic of what Im talking about.
Jim
 
What are the chances of being able to get a vinyl helmet wrap? Something that would be most universal for modern full face helmets, but allow for a retro look without painting.
 
Swapmeet Louie said:
fuckedupme.jpg
Click to expand...

I'm poking around trying to put together a list of Virago builds and stumbled upon this and thought everyone should see it.
 
That's a classic of Swaps. He said he stopped wearing it because folks always picked a fight with him. He had it up on FB for a while.

Ha
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom