Well, about a week and a half a ago EMB sucked the cam chain slipper into the bottom of the case.... Fortunately, it was just idling. And when I heard the crazy grind I ran over and shut'm down. So after braking down the motor, I found damage was minimal. Needed new slipper and tensioner, and noticed that the valve stem seals were in pretty poor shape. So I am waiting on a few gaskets, and should have it back up and rip'n in no time.
So, in the meantime. I have been messing around w/ some different bars etc. I am liking it a little more. He's looking much more dirty chopper/dirt bag biker-ish... haha
I am also considering removing the struts. And remounting the fender so it'll articulate w/ the swing arm. We'll see. EMB was supposed to be done. But it seems I went backwards, from 1 bike done and 3 projects. To 4 projects. Will post up a vid when I get'm back up and running.