hooligan998
Been Around the Block
WHEELS:
These came off my 2003 Yamaha FZ1 at around 35K miles when I did my R1 wheel swap. The front wheel has a bent lip from high speed contact with a piece of 4X4 lumber, but still seats a bead and runs with no wobble or shaking. I've run the front wheel in this condition for a good 10 years or more with no issues. The rear wheel is in good condition and comes with the rotor, clutch hub, and center bearing spacer. The clutch hub is from a 2008 Yamaha R1, but is the same piece. There are no dampers in the clutch hub, so you will need to source some. The wheels have newer All Ballz wheel bearings and seals in them and are still good, maybe 5K to 7K since installed. The front wheel, although usable, I consider unsellable by itself, therefore it's a combo package only, I will not separate. Miscellaneous scratches on the wheel lips are due to being a noob at tire changes years ago.
I am asking $200 for the wheel set. Local pickup only in Chester, VA, unless you really want to fork over the cash for shipping.
ROTORS:
The front brake rotors have around 35K on them, but are in great shape and have plenty of life left in them. They are 298mm OD and a 6 bolt design. There are a few marks on the mounting tabs from a disc grinder where I had to cut the rotor bolts off, but none are deep and are cosmetic.
I am asking $150 for the rotors. I will pay for shipping in the US for the asking price. International buyers will need to pay all shipping costs.
Miscellaneous
First come, first served. I will honor dibbs made on here, but I will not hold. If someone else has the payment ready, they get it. Also note that these are for sale on another forum as well.
I prefer Paypal or cash. If paying by Paypal, pay via gift or add the fees to your payment. This is my first sale thread on here, but I have good history on other forums.
PM me if you have any questions.
These came off my 2003 Yamaha FZ1 at around 35K miles when I did my R1 wheel swap. The front wheel has a bent lip from high speed contact with a piece of 4X4 lumber, but still seats a bead and runs with no wobble or shaking. I've run the front wheel in this condition for a good 10 years or more with no issues. The rear wheel is in good condition and comes with the rotor, clutch hub, and center bearing spacer. The clutch hub is from a 2008 Yamaha R1, but is the same piece. There are no dampers in the clutch hub, so you will need to source some. The wheels have newer All Ballz wheel bearings and seals in them and are still good, maybe 5K to 7K since installed. The front wheel, although usable, I consider unsellable by itself, therefore it's a combo package only, I will not separate. Miscellaneous scratches on the wheel lips are due to being a noob at tire changes years ago.
I am asking $200 for the wheel set. Local pickup only in Chester, VA, unless you really want to fork over the cash for shipping.
ROTORS:
The front brake rotors have around 35K on them, but are in great shape and have plenty of life left in them. They are 298mm OD and a 6 bolt design. There are a few marks on the mounting tabs from a disc grinder where I had to cut the rotor bolts off, but none are deep and are cosmetic.
I am asking $150 for the rotors. I will pay for shipping in the US for the asking price. International buyers will need to pay all shipping costs.
Miscellaneous
First come, first served. I will honor dibbs made on here, but I will not hold. If someone else has the payment ready, they get it. Also note that these are for sale on another forum as well.
I prefer Paypal or cash. If paying by Paypal, pay via gift or add the fees to your payment. This is my first sale thread on here, but I have good history on other forums.
PM me if you have any questions.
