Fing pissed need help

[LtGeorge]

So ive been tryin to run the wire from my switches through my clubmans but i cant get the damn bundle to make the corner, re soldering is not an option as i cant solder to save my life, im trying to pull it through with another piece of wire... any tips?

 

[Tim]

Only tip I have is reverse course and don't bother pulling wires through clubman bars.

Are you even sure there is an opening at the corner, which I presume is the welded joint? These bars are not designed to have wires run inside them - there's a big discussion on this somewhere on the board right now (try the Search function).

Notch your switch housings, throw some nice heatshrink and braided cable sleeve on the wires and get riding

 

[Sp33dwagon]

If you've already got one wire to go through, it may not be sturdy enough to pull a bundle through, i might try a coathanger and tape to yank em through, a little stronger and you can pull harder. You can make a little hook and wrap the wires so they'll never slip off.

 

[VonYinzer]

Only tip I have is reverse course and don't bother pulling wires through clubman bars.

Are you even sure there is an opening at the corner, which I presume is the welded joint? These bars are not designed to have wires run inside them - there's a big discussion on this somewhere on the board right now (try the Search function).

Notch your switch housings, throw some nice heatshrink and braided cable sleeve on the wires and get riding

YES

 

[Thunderchild]

Yep... don't even bother. It's not worth it. See my current thread in the 1-800 section.

TC

 

[LtGeorge]

Epic win only took me 9 hours but I got them through.... All wired up now!

 

[crazypj]

'Next time' blow a piece of string through with airline

 

[LtGeorge]

'Next time' blow a piece of string through with airline

Lol I hope to god there is no next time, i tied a nut to the string and dropped it down