flywheel puller for a honda cl125

[Irishwarelephant]

i posted this on the chicago board and nobody could help, maybe you can, im trying to remove the A.C. generator off a 1970 cl125, and the manual calls for a flywheel extractor (part no. 07011-20001), i think it screws in to the middle and you pull it out. also if anybody knows a way to get this thing off without the extractor please help me out on this one

 

[DrJ]

Do you need to take off the rotor or do you just want to split the crankcase? If you're just splitting the case then you can leave the rotor on, no need to remove it. If you really need to remove the rotor you get a generic one at any automotive shop.

 

[Irishwarelephant]

thanks dudes, i knew there had to be an easier way of doing this

 

[Wee Todd]

I'm guessing it's a 14mm by 1.5mm pitch,,try removing your rear axle bolt and threading it into the rotor or just purchase a new bolt!!