carbon moto
manufacturer of quality cafe racer parts
we bought a few of these cb125 tdc superdreams to build into cafe racers as the frame is very similar to the cd200 & we have made a special seat to fit these (we have built 2 cd200's & have a few more in the pipeline)
& i enjoy playing on these small twins
&
We decided to do something a bit different with this bike, looked in our spares room & found a set of upside down forks off a 125 so we offered them up to the frame, modified the bearings opened the spindle size up by 2mm & hey presto they fitted & allowed the standard front wheel to be used. Next was to chop the frame rails off,cap the ends & weld on the seat mounting brackets, removing loads of unwanted brackets before sending for powder coating (ral 2007). Frame, swinging arm, fork bottoms & the engine mount cradle in orange, everything else in satin black
& i enjoy playing on these small twins
We decided to do something a bit different with this bike, looked in our spares room & found a set of upside down forks off a 125 so we offered them up to the frame, modified the bearings opened the spindle size up by 2mm & hey presto they fitted & allowed the standard front wheel to be used. Next was to chop the frame rails off,cap the ends & weld on the seat mounting brackets, removing loads of unwanted brackets before sending for powder coating (ral 2007). Frame, swinging arm, fork bottoms & the engine mount cradle in orange, everything else in satin black