JackSuarez
New Member
Hey guys I'm new to this forum, but I'm in the process of completely restoring my 80' Cb750c. I've done every thing and now I'm down to the carbs and having problems. I thoroughly cleaned the carbs, dipped in pinesol removed float bowls and everything to clean them by hand, etc. I even re-did all the O-rings. Now before I put the carbs back on the bike I wanted to test out the fuel. I hooked up a fuel line to the carbs and poured about half a Gatorade bottle full of gas. The problem is that the carbs aren't holding any gas. It's just going straight in and straight out through the overflows. I inspected the float and the float needle and they look fine. I don't know what else could be the issue.