caveman592
Been Around the Block
So I have a 75' CB200 and I have been struggling to get it running right. I have replace the stator, condenser, air filters, rebuilt the carbs cleaner the tank of rust, got new plugs and plug caps. The compression is decent and the plugs are fine it seems to run rich. But the thing is that the left side won't fire properly it only goes intermittently. I think it also does this on the other cylinder but I am not so sure about that as it hasn't done it in a while. Also the points are good and the timing is good. So I don't really know what to do next to fix it. Any ideas people? Since I got the new filters I assume I will need to change the jetting at some point. I kinda doubt it could be the jetting could be the problem though.
