I have a 2 into 1 exhaust for a Honda 350. This is from the seventies and don't know much about them. I am going to go a differenet direction with my build and no longer need these. These are not perfect by any means. There are some small dings and scraps. The rear tab that mounts to the footpeg is starting to break as shown in pictures. (I would be happy to weld this for the new buyer if wanted). Looks like they have also been cut once and re-welded right before they split into 2. Not the best weld job. These do fit tight on the bike but they do fit. They just barely touch the frame in front of the motor so if you have freshly painted frame these might not be for you unless you are willing to modify them slightly. If I were to keep them I would add a 3/8"-1/2" somewhere so they didnt rub. Pictures show them mounted on my bike. Muffler has a nice sound to it. Please note I do not have a center stand on my bike and cannot garentee that they will fit with a center stand. Feel free to contact me with any questions or more pictures. Located in the Chicago area and willing to meet in the area if needed or will ship on your dime. Asking $150. I will post more pictures later of the pipes not on the bike.
