Nickel89
N|E|R|D
I've been piecing together a CB360 big bore engine, 383cc now. She's all ready to go, apart from the fact I can't seem to get a spark from it.
Found a donor engine, taking the old engine out, swapping things like the Pamco ignition straight over. Dyna Coils are entirely new to the bike, but I've checked with Dynatek technical support, and they seem okay. Ever so slightly expecting the Pamco to be faulty (didn't miss a beat before) or I might've messed up somewhere else.
Just don't know how to measure what where. It's a custom wiring loom I had made years ago, but the dude who made it seems to have vanished. So no wiring diagrams.
Sort of the current state, for about two weeks now... can't seem to get my head around it. She's got compression a plenty (kickstart only; great idea) and smells like she's getting fuel too. Just won't set it off.
Anyone got an idea? Because I'm lost here!
Big bore engine mod list:
- 383cc big bore
- Custom stainless 2-into-1
- Mild headwork
- Flushed head
- 10.5 : 1 compression
- Kibblewhite racing spring and titanium retainers
- New valves
- Mikuni VM30 carburetors
- Domino quick action dual pull throttle
- K&N pods
- Gearbox etc. superfinished
- Dyba Coils
- Pamco digital ignition
- Reg/rec upgrade
- Starter motor removed
- Plain bearing shifter mod
- Lubrication mods
- Clutch mod
Found a donor engine, taking the old engine out, swapping things like the Pamco ignition straight over. Dyna Coils are entirely new to the bike, but I've checked with Dynatek technical support, and they seem okay. Ever so slightly expecting the Pamco to be faulty (didn't miss a beat before) or I might've messed up somewhere else.
Just don't know how to measure what where. It's a custom wiring loom I had made years ago, but the dude who made it seems to have vanished. So no wiring diagrams.
Sort of the current state, for about two weeks now... can't seem to get my head around it. She's got compression a plenty (kickstart only; great idea) and smells like she's getting fuel too. Just won't set it off.
Anyone got an idea? Because I'm lost here!
Big bore engine mod list:
- 383cc big bore
- Custom stainless 2-into-1
- Mild headwork
- Flushed head
- 10.5 : 1 compression
- Kibblewhite racing spring and titanium retainers
- New valves
- Mikuni VM30 carburetors
- Domino quick action dual pull throttle
- K&N pods
- Gearbox etc. superfinished
- Dyba Coils
- Pamco digital ignition
- Reg/rec upgrade
- Starter motor removed
- Plain bearing shifter mod
- Lubrication mods
- Clutch mod