Honda CB360 Clutch Actuator Bearings Size?

[2.3efi]

I'm trying to find the size of the three bearings that ride in the clutch actuator that move it up the ramp mechanism. Anyone have any info? Thanks!

They ride in the other side of this part

 

[crazypj]

They should be caged.
Pretty sure they are 3/16"
I'm 'almost certain' the one in the center is 1/4"
The caged bearing is probably still available from Honda ( if you cross reference it)
I know I saw one recently in a newer model

PJ

 

[2.3efi]

Thanks for the quick reply! I think my actuator might be toast, I tried some new bearings and still not luck. The actuator has some deep grooves in it.

 

[3cermak]

It's a 5/16 bearing that goes in the end.

I had a similar problem with my 360 a month ago or so and ended up replacing the entire actuator. If the ramps are worn or the actuator wiggles at all in the cover It'll be a nightmare to adjust it if at all. I'd suggest just replacing it and save yourself some time and head to wall contact.