Hey guys, Last year I began a resto for a 1975 honda cb360. I spent the whole summer tinkering with it and i got quite a bit done but I recently got accepted to university and i need cash and I really dont have time this summer to work on it.
The bike has had quite a bit done to it. The forks were rebuilt, Fresh spitfire s10's are on the rims, New wheel bearings were installed, and some of the parts have been painted. I also bondoed (and did quite a good job too if i do say so myself) and kreemed the inside of the tank, all it needs is a quick sand and a coat of paint and its done. I also re-did the carbs and I have ownership for the frame too!
Theres still alot to be done, which is why i need to sell it, but its almost all there. The only big things you would need to get your hands on would be a key (i have the key number so you could get one easily, i just lost my set.) and a new seat pan. The engine ran well but I never got around to opening it up.
I've listed this up on kijiji for 1100 but will let it go for less probably for someone from DTT. I put about 1700 into the project if not more, so im just trying to cut my losses at this point.
PM me if you are interested, Located in the GTA, Scarborough to be more specific.
The bike has had quite a bit done to it. The forks were rebuilt, Fresh spitfire s10's are on the rims, New wheel bearings were installed, and some of the parts have been painted. I also bondoed (and did quite a good job too if i do say so myself) and kreemed the inside of the tank, all it needs is a quick sand and a coat of paint and its done. I also re-did the carbs and I have ownership for the frame too!
Theres still alot to be done, which is why i need to sell it, but its almost all there. The only big things you would need to get your hands on would be a key (i have the key number so you could get one easily, i just lost my set.) and a new seat pan. The engine ran well but I never got around to opening it up.
I've listed this up on kijiji for 1100 but will let it go for less probably for someone from DTT. I put about 1700 into the project if not more, so im just trying to cut my losses at this point.
PM me if you are interested, Located in the GTA, Scarborough to be more specific.
