Honda CB466F Barely Legal Track Bike "Goldie"

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Whipped up a quick bracket for the rear of the exhaust. Carbs are half done.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Actually made some progress. Got the carbs back on the rack and put on the bike so I can route my throttle cables. Now I can put on the HRC 1/4 turn throttle. Also got my 11mm brembo brake master and domino clutch perch.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Some more progress tonight. Oil line clamps are on. Modified the stock coil brackets and mounted the coils. Also got the throttle and grips on. Also got a hand from my helper

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Last round of clear tomorrow for tank, tail and tail lite.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Clear is a wrap! Laid down really nice.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Hidden tail lite is in. Tinted and flush mounted led unit

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Had to put the bodywork on just to get a few. Next up is wiring

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

New levers are in.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Carbs are ready for the ole girl and I got plates done today. It hasn't been registered since the early 90's!

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Front master is painted, line installed. Also got my plate mount on the tail. It can flip up and be out of the way.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Got my fork clamps I'm going G to use to mount my number plate.

Controls are about a wrap.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Headlight is mounted. Keep in mind this is only to keep me legal and get me home if the sun goes down. Also thisight has 2000 lumens so it's very bright. Also has a dimmer switch.

 

[2_DONE_THE_TON]

Re: Honda CB400F Track/Street Bike "Goldie"

Looks amazing man!

May I ask where did you get these bar switches from?look really nice and clean!

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Looks amazing man!

May I ask where did you get these bar switches from?look really nice and clean!

Thank you! The right side switch is made by domino and sold by motion pro and the left switches are the ones that come with the speedhut gauge and the dial comes with the clearwater led.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Number plate is mounted and first round of polish.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Polished and mounted the tray. I'll mount the components next and then route the wires.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

All components are mounted. Glad I used to do car audio installs. This wiring is tight on room but will look great once done.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Also got my plug lines installed.

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Finished ignition switch bracket and one for my gauge switch and headlight dimmer

 

[innovativems]

Re: Honda CB400F Track/Street Bike "Goldie"

Finally wrapping up some customer bikes and got to the home stretch for wiring. From the coil ground forward is done. Also get setup with speedcell as a dealer and had to redo my electronics tray to account for the little bit of size difference. Also got my stator