Does anyone have a good way to attach the small, loose magnet to the wheel, for an after market speedo?
For example, I bought the motogadget mini gauge. It has a small wire with a sensor at the end, which will be attached low on the fork or somewhere near, then a very small magnet that passes by the sensor which needs to be attached to the wheel (probably the inner, non-used part of the rotor because of the distance to the sensor).
I saw a thread somewhere that recommended epoxy to attach the magnet, but I thought i would see if anyone here had any other ideas. Thanks!
For example, I bought the motogadget mini gauge. It has a small wire with a sensor at the end, which will be attached low on the fork or somewhere near, then a very small magnet that passes by the sensor which needs to be attached to the wheel (probably the inner, non-used part of the rotor because of the distance to the sensor).
I saw a thread somewhere that recommended epoxy to attach the magnet, but I thought i would see if anyone here had any other ideas. Thanks!