How to hotwire ignition?

The timing shouldn't be adjustable - it should have a set key on the flywheel to locate it.

But.....if the key is missing and the flywheel has spun....
 
Have you tried Start Ya Bastard?

If it will run on that you more than likely have a fuel issue.

Hillsy makes a good point about the flywheel as well.
 
The key is good, just put a new one on earlier. The points plate has 3 screws holding it to the casing..I was told that if you turn the points plate either left or right it adjusts the timing, could be false information.
 
I am not sure if this correct, but if I have both magneto wires connected to the ignition coil, shouldn't this be all I need to bench test the motor?
 
Back
Top Bottom