Identify CB370 frame tabs

fiedler.casey

Active Member
Hey all, I'm trying decide to save or cut these last two tabs. Can someone identify them and advise as to cut or save? First one is right under the steering tube up front. The other ones (symmetrical) are below the seat and in front of the old battery box.
 

Attachments

  • ImageUploadedByTapatalk 21368384686.876899.jpg
    ImageUploadedByTapatalk 21368384686.876899.jpg
    74.9 KB · Views: 424
  • ImageUploadedByTapatalk 21368384698.887901.jpg
    ImageUploadedByTapatalk 21368384698.887901.jpg
    79.2 KB · Views: 377
Front one is to mount a Honda friction steering damper, may be handy to keep?
The rear pair hold the stock airboxes
 
Re: Identify CB360 frame tabs

Cut them off!! Even if you wanted to mount a steering damper, you probably wouldn't use the factory mount anyhow.

. . . and since you already cut off the factory battery box mounts, the factory air boxes aren't really going to mount very well.

 
Re: Identify CB360 frame tabs

Psst - You can change the subject line from 370 to 360 if you edit your first post. Just trying to save you the headache of all of us asking you the same question over and over again.
 
Back
Top Bottom