Hey folks this is a repost from my build thread but i thought it might be useful to repost it here. I have an indicator problem. Rear indicators working fine. Front indicators not so much. So I have an electric riddle which I could use some help with.
Rear indicator voltage output is a healthy 12.54v
Front voltage Right side is 10.30v steady.
Front voltage left side is on a continuous variable voltage from 4.5v up to 8v and back down again...
It seems the indicators for the front that I want to use won't accept anything but 12v.
I can attach cheap indicators to the front which work though rather weakly.
I though maybe I could try removing and bridging some resistors on the indicators I want, though I don't know which resistors to remove.
How to fix please.
Rear indicator voltage output is a healthy 12.54v
Front voltage Right side is 10.30v steady.
Front voltage left side is on a continuous variable voltage from 4.5v up to 8v and back down again...
It seems the indicators for the front that I want to use won't accept anything but 12v.
I can attach cheap indicators to the front which work though rather weakly.
I though maybe I could try removing and bridging some resistors on the indicators I want, though I don't know which resistors to remove.
How to fix please.