Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Ahh I swear read that post! Must have missed the most important part!
As great as your service was when I bought the Rectifier/Regulator from you last month, if the diode is something I can get from a local store tomorrow I will probably do that. Shipping to the other side of the world and all that..
Exactly what type of diode would I need? I'm seeing a lot of options.
I wasn't too clear in the first post but when the indicators are activated don't flash, even though I have bought an LED flasher relay. Will this be fixed by adding the diode or do I have a bum relay?
Okay so I wired in the diodes and then spliced the right and left indicator wires together.
Then I created the earth as instructed in the post.
Now the left side indicators flash perfectly but when I move the switch to the right the lights do not come on at all and the neutral indicator light flashes.
Neutral light should be plugged into a black wire and the light green/red wire. Turn signal indicator should be connected to the diode setup you just created and the other side grounded.
Sonreir,
Instead of 2 diodes and using the original incandescent light, I used 2 small LED's (appropriate resistors too) instead of one LED and 2 Diodes. The 2 small LED's fir right in the yellow lens assembly. Only one LED lights per side, and it looks the same. Just another way of doing it. I did it because the resistor and LEDs easily fit completely in the lens assembly.
Yup. Also a good call. I use the diode setup because I buy them in bulk and they're often necessary for aftermarket gauges that already come with a single component LED.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.