Installed Universal Coils on CB350 - blowing fuses

[h2focus]

I ordered and installed some universal coils from this link, along with new coils and boots onto my cb350

http://www.speedmotoco.com/ProductDetails.asp?ProductCode=03010

As soon as i turned my key to on, it blew my fuse. I replaced the fuse, just to make sure it was good, and it kept doing the same thing. Within 15 seconds the fuse would blow.

I know others in the link state the coils worked fine on their bikes, but did they use a different fuse?
Am I missing something I needed to add when I upgraded my bike? Heading out again to check my wiring, just in case...

 

[DrJ]

Are you sure there's no bare wire touching the bracket or frame?

 

[h2focus]

Thanks for the reply.

The prongs were barely touching the original mounts and were grounding out. Wrapped them up good and relocated them. I now have great spark ! 8)

 

[bikeboy]

Are you sure there's no bare wire touching the bracket or frame?

nice pick-up Dr


ian

 

[olivecb350]

Where is the cb350 fuse?

Yesterday I went to start my bike and as she was about to turn over everything went quiet. I am guessing this is the fuse because I just charged the battery.

Where is it and what does it look like?

Is it in a case of sorts?

Would this even be my issue by the sounds of it?

THANK YOU!