jsouthard
Lean Left, Push left, Go Left.
Hey Guys,
Working on a XS360 project. Recently acquired a set of 30MM Mikuni Carbs (VM30).
Have any of you used them before? If so, can you recommend a good jetting starting point? Currently it has a 45 pilot, 140 main, 2.5 slide and needle at the second from the top. It will start but not idle and appears to be extremely lean. Will not run off choke.
Any suggestions will be appreciated. Thanks,
Joe
Working on a XS360 project. Recently acquired a set of 30MM Mikuni Carbs (VM30).
Have any of you used them before? If so, can you recommend a good jetting starting point? Currently it has a 45 pilot, 140 main, 2.5 slide and needle at the second from the top. It will start but not idle and appears to be extremely lean. Will not run off choke.
Any suggestions will be appreciated. Thanks,
Joe
