Let me see your tail section with lights

[teddpage]

NICE! Another model a taillight! I like it

 

[Mod Newb]

Well...mine's not integrated really. I just bolted it onto the fender.

And here's a view from the front:

 

[teazer]

Another Yamaha R6 rear integrated LED light unit mounted upside down this time on a custom bracket inside a modified flat track style seat. That picture was taken a long time ago and the bracket now has a license plate mount welded to it and the seat has a hatch in the top to access the storage bin I molded in there - but that's a whole other story... ;D

 

[locOleoN]

on my xs bobber hard tail:

for my triumph hard tail:

on my sr500 brat:
seat 1: old tractor headlight rewired for 1157 bulb

seat 2: 59 Caddy taillight

 

[Garage_guy_chris]

the tail light used is a LED replacement unit for a 1937 ford, made by United Pacific

the backside and mounting

 

[andrew]

my home depot special.

.

.

.

 

[ctluba]

How about my stock tailight with no tail at all. Lets put it this way, it dont look good, but it works.

 

[my-79-750-k]

How about a round 1 led light rubber mounted in the tail, always on, with another flat bulb light underneath that only lights up when braking?

 

[seven54]

on my xs bobber hard tail:

for my triumph hard tail:

on my sr500 brat:
seat 1: old tractor headlight rewired for 1157 bulb

seat 2: 59 Caddy taillight

That caddy light would look great frenched into a boat tail style seat.........................

 

[ariel.714 o/c]

Dude i remember seeing some guy had a tail light with turn signal relays built in to it. I dont know how he did it but it was awsome it got rid of the mounted signals. Kind of like a two for one deal ar Mc Donalds .
Does any one recall seeing this on the forum?

 

[Dirty Dan]

Not attached yet, can't decide where I want to mount it. Like in the picture or I could make a bracket so i can just connect it to the upper shock bolt, mount the light and the plate off to the side.

What do you guys think?

 

[Big R]

If you do mount that there, make sure your suspension has the travel to not chew up your plate.

 

[seven54]

OK,

Here's my contribution, Highway hawk cats eye taillight (around 30 bux) with cheap Chinese blinkers from ebay (36 bux for 4). I sprayed them black.

 

[belch_brother]

So my theory is to use this:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=300380535916&ssPageName=STRK:MEWAX:IT

in my tail:

 

[belch_brother]

So I did some investigating... Turns out the light doesnt fit in the tail section... boo... back to the drawing board.

 

[I.Crashalot]

I used an old Honda turnsignal on a CB360 I used to have.

On the CB350 I'm doing now, we built a rear brace/battery box/ taillight holder......

 

[cowboysculptor]

Posted this in another thread, but thought I'd share it here as well. Hand-built tail and taillight.

 

[urbandork]

 

[Nein_Collins]

So I did some investigating... Turns out the light doesnt fit in the tail section... boo... back to the drawing board.

http://cgi.ebay.com/ebaymotors/HONDA-ZOOMER-NPS50-LED-TAIL-LIGHT-LAMP-w-SIGNAL-SMOKE-/390260873044?pt=Motorcycles_Parts_Accessories&hash=item5add5c5754

how about this one for the honda ruckus? i think its size would suit your application..these guys make good stuff too...I've got one of their sequential led lights on my Buell

 

[urbandork]

heres another one I did