Levers (yes i searched!)

[Rocco]

hey guys! my levers on my 1980 CB750k are garbage and they are not even a matching garbage set!

my brake master cylinder (reservoir) is leaking as well

i'd like to get another set from an actual bike company as opposed to a no name ebay brand, just to be safe.

i'm going to get new lines, probably steel as well

what bikes, years, models etc. can i use? any? i have clubmans so they will need to clamp on and i'd like to find a set with a master cylinder on it. can i just throw some newer cbr levers on there? gsxr? r6? etc...

thanks in advance!

 

[nrcb125]

I'd think anything from a newer bike would work. Make sure the master cylinder bore diameter is the same as your CB and it should be smooth sailing. By no means am I an expert on the CB750s though.

 

[Rocco]

Thanks! that's what i was thinking! i believe they are 13mm???

I'd love to have a nice set of red levers to match my paint job that i am currently doing!

 

[J-Rod10]

14 mm I believe. Find a set off of a newer CBR.

 

[Rocco]

Nice! thanks for clarifying! 600 or 1000? doesn't matter?

my buddy said he might have a set from a gsxr but i'm not sure of the size or year yet

 

[J-Rod10]

They'll be more than sufficient for your bike, so long as the bars are the same diameter.

 

[nrcb125]

On my Ninja 500 the master cylinder bore diameter is actually written on it. I think it's this way for most newer bikes, and possibly on your CB.

 

[Rocco]

good thinking! the bars are still 7/8" so mounting shouldn't be a problem just the caliper hose size.

i daily rode a ninja 500 for almost 3 years, could not kill that thing!