Mac 4into1 question

[warpt_99]

I'd like to the purchase the Mac - 801-1301 to fit on a 1971 CB750. I like the Mac - 801-1301 because it has the longer pipe with upsweep after the 4into1 connection. I have removed the passenger brackets from my bike so I believe the clearance is there for this exhaust to work but I'd like to be certain. I assume it's the same connection at the engine but I'm not sure. Anyone have experience with this install? Thanks for the help!

 

[irk miller]

The bigger issue is clearance for the rear set brake pedal. You need to make sure you have enough throw to engage the brake. I had to move my rear set up an inch on the right side to make clearance for the exhaust. It's something you don't notice while you're riding, but if you look at my bike from the back, one set is higher than the other.