Also I just did some poking around on NGWCLUB and I think the bike didn't really get warm enough to have the fan kick in, I am going to still test it to make sure it spins, then sort the back brake, then go for a good 20 min shakedown ride and see if it kicks in at low speed. If it spins but doesn't kick in when the bike is fully warmed I will get a new switch, there are lots of cross overs on the forums I can get from a NAPA etc.
Edit: there is a method to clean the switch so I will take the 1100 one out, clean it, then do the test, then swap it out if it's good. I can do the cleaning while I sort the rear brake and wait for body fill to dry etc.