Master Cylinder rebuild help

[riotten22]

Hey guys rebuiling a master cylinder on a 1974 Honda CB350f Having trouble getting the old stuff removed. Is there a Snap ring holding the piston in place or just a normal lock ring? I cant see any holes in the ring where you would use snap ring pliers... Any tips or tricks to getting this out?

 

[riotten22]

Couple of Pick tools and alot of patience i finally got the snap ring out ! Should be much easier putting it back together (i hope)

 

[OpTiCz]

Not much easier....
Just make sure everything is super clean.

Sent from my HTC Glacier using Tapatalk