ACEitup
Been Around the Block
Hey all replaced my standard carby
this arvo with a Chinese Mukini off ebay
Decided to start this project early in the week
as I would have a few days up my sleeve to adjust
tweak and repair any cock ups I made!
After replacing exhaust the other week, I felt the bike
was ready for this step.
Just bolted it , didn't even turn an idle screw!!
straight out of the box (padded chinse bag Actually)
woot!
Pretty happy with performance on the short run up the shops!
Success at my first real mechanical task
cheers ACEitup
PS here's the link for the mikuni if u want it
http://www.ebay.com.au/itm/281083375124?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
this arvo with a Chinese Mukini off ebay
Decided to start this project early in the week
as I would have a few days up my sleeve to adjust
tweak and repair any cock ups I made!
After replacing exhaust the other week, I felt the bike
was ready for this step.
Just bolted it , didn't even turn an idle screw!!
straight out of the box (padded chinse bag Actually)
woot!
Pretty happy with performance on the short run up the shops!
Success at my first real mechanical task
cheers ACEitup
PS here's the link for the mikuni if u want it
http://www.ebay.com.au/itm/281083375124?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649