Motogadget M-Unit & Ricks Regulator/Rectifier Help

[mdelau91]

So i have a '75 CB750K5 and i just recently purchased a motogadget m-unit and ricks regulator/rectifier combo. I have most of the bike wired, all the lights and buttons work, now I'm moving onto the starter/charging system. Im a bit confused about how to wire the reg/rec, I know the black cable goes in with lock, but I have 7 other wires I'm not sure where they go, 3 yellow, 1 red, 2 green (each are a different gauge wire) and 1 white, any help would be greatly appreciated so i can get this thing on the road, thanks!

 

[SkullCrusher]

Ricks rectifier should have a quick disconnect that goes where your old rectifier went and 3 spade connectors where your old regulator went. Plug and play. Let me see if I can find a pic of mine wired in..

 

[SkullCrusher]

If you look just to the right of the r/r you'll see spade connectors with red tape on them. Those came off the old equipment.

 

[SkullCrusher]

Oh, didnt know what an m unit was.

3 yellow go to the 3 yellow from stator

White and black go to white and black from field coil

Green is ground.

 

[Wolfie]

m-unit... lock is the Ignition on terminal only. putting 12 volts to the lock terminal turns the unit on. nothing else goes there.