My 1975 CB360
- Thread starter bhppy101
- Start date
HerrDeacon
Over 1,000 Posts
Very nice, as always!
krukster86
Been Around the Block
Wow I hope my 360 looks even 1/4 as good as that when I am done. Congrats on the bike!
patricke9 said:
Unfortunately I didnt snap any before pics....I usually do but I have been to busy and I forget. I think I'll have to make it a habit to do before and afters
I just picked up a 1974 CB360 and Ithis time I'm ging to make the seat a little shorter and I will be gutting the centers and mounting all the electrics under the seat.
krukster86
Been Around the Block
What exhaust are you using?
guitargeek
Been Around the Block
That looks great!
I also was wondering about the turn signals I can't see where they are mounted but it looks like you removed most of the original mounts and used different headlight brackets. So how did you mount the signals? Also was wondering what model seat that is? I would like to look up how long and high it is.
Thanks
dave
Thanks
dave
HOOLIGAN said:
They are tinted mini stalks from http://www.chaparral-racing.com/Chaparral/assets/html/homepage.asp?URLCheck=1 . I'm not sure if they have them on the website...but if you order a free catalog from them you will see them there. I go to the store once or twice a month.
hanly2 said:
The signals are mounted in the aftermarket headlight bracket and I welded some tabs to the rear frame for mounting. In the picture...you can barely see the rear signal hanging....lol.. I tack welded the tab and rode it behind my house where I take bike pics and the tack weld broke loose.
I make the seats from fiberglass. The seat hight is about 30-31 inches
