Re: My Cb360 Build Log
Got the bike running a couple weeks ago.. runs like pure crap of course but it is alive.. (though its on life support) Anywho all it took was a fresh batt, main fuse and a new starter solenoid. I also had to ditch my fuse box because the connector that came off it was horrible corroded and pretty much ruined. the cool thing was how easy it ended up being. there are 6 wires total that go through the connector and three go to one side of the fuse box and then the three coming out of the fuse box go back into the connector. Making a loop so to speak. so all i did was cut off the connector all together and spliced in 3 inline fuses with a little dead light that lets me know when its been popped. looks kinda ghetto but the main goal was function over form for this task. ill post up pics of that tomorrow.
PLANNNNNNNS!!!!!!!
Get bike running and road worthy for the season
After the season is up I want to do a complete rebuild over winter (engine,paint, fancy doodads, etc)
Plans for now
Engine needs a full tune. (carbs, points adjust, timing, valves) and whatever else i find to tune in the mean time
Not really worried about looks for now, i just want it to work
Ill Need: tires, tune, title sorted out, tail light (not running the huge factory one lol) Fix leaky fr brake lever... Prob some things im leaving out but im drawing a blank right now so ill post up later if i remember.
One more thing.. Im sure there are those out there who are doing Restorations on other 360s. I dont really plan on keeping any of my factory stuff i remove so if you would like to buy any of it or trade items just let me know. Ill also post pics of the leftovers tomorrow too.