jay_kent
1979 cb650
I wanted something a little different than the typical mini-signals a lot guys are running. So off to ebay to purchase a set of signals for a ca90 from the 1970s. Only problem was when they arrived from Thailand, they had a 6 volt bulb the same size as my cluster lighting. Sooo, not going to be very bright and therefore noticeable.
Long story short I purchased a bunch of 5mm superbright leds, some resistors and soldered up some new lights.
First half of the video is the oem lights for a Sr250, 2nd half is the LEDs. You might be able to see the difference. If people are interested I'll post a how to on the wiring aspect.
Jay
[youtube=425,350]<object width="640" height="505"><param name="movie" value="http://www.youtube.com/v/z8EP8A1utWM&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/z8EP8A1utWM&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="505"></embed></object>[/youtube]
Long story short I purchased a bunch of 5mm superbright leds, some resistors and soldered up some new lights.
First half of the video is the oem lights for a Sr250, 2nd half is the LEDs. You might be able to see the difference. If people are interested I'll post a how to on the wiring aspect.
Jay
[youtube=425,350]<object width="640" height="505"><param name="movie" value="http://www.youtube.com/v/z8EP8A1utWM&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/z8EP8A1utWM&hl=en&fs=1&color1=0x5d1719&color2=0xcd311b" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="505"></embed></object>[/youtube]