gijoe13844
Coast to Coast
Trying to get the buell thunderbolt front end on the 79 xs11 frame.
Buell stem OD is 25.4mm or 1 inch.
Xs neck top race mount ID is 47mm, lower is 55mm, widths are 11mm and 16mm respectively.
so my top bearing needs to be
25.4/47/11
bottom
25.4/55/16
problem is that neither allballsracing or McMaster carries anything in that size.
im thinking my option may be to either turn the stem down or machine a bushing that fits in the neck....or both.
Any other thoughts?
Buell stem OD is 25.4mm or 1 inch.
Xs neck top race mount ID is 47mm, lower is 55mm, widths are 11mm and 16mm respectively.
so my top bearing needs to be
25.4/47/11
bottom
25.4/55/16
problem is that neither allballsracing or McMaster carries anything in that size.
im thinking my option may be to either turn the stem down or machine a bushing that fits in the neck....or both.
Any other thoughts?