Need better / more convenient way to attach Motolanna seat

[mr vroom]

Got the seat mounted via the two tabs in the front ( works fine ) and screw holes in the rear. Screws go through the sub frame and up into the seat . It works, but I often need a flashlight to carefully line up the hex screws with the holes. There has got to be a better way. Most builders here are a lot smarter and more creative than me. I don't need to be original.. What's a better way?

 

[Rusnak_322]

Loctite a stud into the seat pan and then slip the studs thru the holes in the sub frame and use a nut to hold the seat in place.
Or go tricky and drill a hole in the stud, use a rubber washer between a metal washer and then use a locking clip for tool less removal.

 

[mr vroom]

Thanks! I like reallynlike that idea. Will have to find a friend with a drill press...

 

[CarbonK]

I ended up epoxying two elevators bolts to the bottom of my seat, drilling two holes in the crosspiece where the seat sits and using wing nuts to secure it.