Need headlight Help

[Jared]

Alright guys really quick, on my CL350's headlight I have the standard, white, green and blue(I think I am doing this off memory) wires. Is there anyway I can make a super simple harness just for it and the tail light? Say one that only hooks up to the battery, switch and high/low switch? Any suggestions will be appriciated! -Jared

 

[hillsy]

As far as your headlight goes, you can't have any less than 3 wires so I'm not sure if it gets much simpler ??

 

[Jared]

ThAnks Hillsy, I'm talking about a simple harness that I won't have to splice into the main harness.

 

[Big R]

Why exactly?

If your headlight is wired directly to the battery (and not through the ignition) then it will be VERY easy to leave it on by accident.

 

[Jared]

Well I need some way that it is wired to the ignition. I wrote it rather late at night, so Rich do you know a way I could wire it to the ignition or something?

 

[crazypj]

Red from battery to ignition switch in, out- black to fuse
get a fuse box where 3 fuses connect to common on one side then use
1 for ignition,
1 for lights
1 for indicators/brake light.
Are you going to use an on/off switch for lights?
Wire from fuse box to on/off switch
from on/off to center of high/low and to taillight
That's about the simplest set up you can get, even less wires if you leave out on/off switch for lights

 

[Jared]

Thanks PJ helped a lot man! I am using the switch so no biggie though.