need pic of kicker spindle and gears inside lower case

[blueandy]

ive somehow messed up my kicker assembly or the spring is f@#$%^%. does anyone have a picture of the kicker spindlethe way it looks inside the case? and do i have to wind up the spring or anything? i followed manual as well as parts fiche and it still is screwed. its making a clicking noise as the bike runs, as if its not disengaging. ive moved the lever on the spindle as well, and it almost seems like it wants to go to far forward sometimes. but it does start the bike. the only thing that isnt hooked on the bike is the clutch cable which i would assume would have no bearing on the kicker besides disengag in while its pulled in

 

[GLENNWOOD55CAMEO]

What make, model and year bike are we talking about here?????????

 

[blueandy]

sorry tried to make sure everything made sense and completely forgot about that 74 cb360

 

[blueandy]

so no pictures i assume?

 

[eram]

Theres a couple floating around on the board...try searching 360 kick spring or something.

Here's one in a good build thread: http://www.dotheton.com/forum/index.php?topic=20106.msg214987#msg214987

 

[jackditch]

Here's one in a good build thread: http://www.dotheton.com/forum/index.php?topic=20106.msg214987#msg214987

Can somebody tell me if the CL350 spring assembly is similar/same as the 360 in this thread?