Need Rubber Air Boot

Squirrely1

New Member
Does anyone have a spare air cleaner rubber boot for a cm400?
 

Attachments

  • 20231205_130649.jpg
    20231205_130649.jpg
    623 KB · Views: 38
  • 20231205_130659.jpg
    20231205_130659.jpg
    661.6 KB · Views: 42
  • 20231205_125649.jpg
    20231205_125649.jpg
    558.7 KB · Views: 38
  • 20231205_125642.jpg
    20231205_125642.jpg
    1.1 MB · Views: 43
If the boot is not torn it can be softened using Wintergreen with a combination of either xylene or acetone. Some folks have had success using a heat gun or hair dryer too. Google will give you a variety of methods.
 
If the boot is not torn it can be softened using Wintergreen with a combination of either xylene or acetone. Some folks have had success using a heat gun or hair dryer too. Google will give you a variety of methods.
I need one boot... the one I have is plyable thankfully.
But, thank you for the info :~)
 
Not yet sorry. I have one more bin but it's buried in a renovation at the moment. I will be moving things back this week as the room gets finished and should be able to get to the last bin.
 
Strike 3, got into the last bin today, has 3 drum brakes and some clutch parts but no air boots. I gave away a bin of parts with my 450 when I sold it so the boots must have been in there along with the airbox.
 
Strike 3, got into the last bin today, has 3 drum brakes and some clutch parts but no air boots. I gave away a bin of parts with my 450 when I sold it so the boots must have been in there along with the airbox.
I really appreciate you looking for me!! Hopefully someone else who might have one might see this post: :~)
 
Back
Top Bottom