Need some advice and some Adjustment help.

[JonnyLong]

I currently have the stock throttle cable and assembly.

I would like to replace it with a more sleek/simple throttle calbe /assembly.

Currently I have all the buttons out of the box im just using the throttle

If you have replaced the grips and throttle assembly and have a link i would appreciate the help.
------------------------------------------------------------------------------------------------ Second Part------------

About the adjustment:

I replaced the clutch lever with a universal off of fleabay. I is loose on the bars and cannot be tightend any further.
(looking for a suggestion on shim...)

Also, when I replaced it. I had to disconnect the cable from completely and then put her back on.
After putting it back on I noticed that when i pulled in the clutch it was really soft.... I adjusted it blindly. (now firm and feel much better like before the removal of the cable.)

A few days later i was pushing her further into the garage. When I engaged the clutch lever I heard a clunk sound come from the clutch cover area. Now, everytime i engage the clutch it seems not to work and I hear a clunk sound.....

What the hell is that?

Thanks in advance for any help I get... as you can see i definitely need it.

 

[Redbird]

31 views...

Find a dirtbike throttle assembly. They're usually cable only, no switchgear.
Like this...
single cable:
http://cgi.ebay.com/ebaymotors/Throttle-Handle-Bar-Set-Grip-Casing-50-125cc-Dirt-Bike-/330559308948?pt=Motorcycles_Parts_Accessories&hash=item4cf6dec494
push/pull cables:
http://cgi.ebay.com/ebaymotors/Throttle-Assembly-Push-Pull-YZF-XT-Dual-Sports-Dirtbike-/160587587029?pt=Motorcycles_Parts_Accessories&hash=item2563c41dd5

 

[forcefanajd]

or switch to 1" bars and run an internal throttle

 

[JonnyLong]

okay say i want to go to one inch bars can you give me the setup i'd need to go from 7/8 to 1 inch

 

[forcefanajd]

what kind of bike is it?

 

[JonnyLong]

cb 360