So the title pretty much sums everything up. So I just changed my handle bars and new my bike won't start nor do my headlights work weird part is my turn signals are working. I checked my connections using a multimeter and found I got a signal on this metal bracket (in the picture its the piece of metal right below the yellow wire) on the inside of the turn signal/head light assembly. Does it have to be grounded to my bars?
might seem like another dumb question but would I need to sand the the paint in all 4 areas in order to get my connection grounded?
Ok well I decided to sand down the paint on the far right and left circles in the picture above, turn the key and press the push start and still nothing happens. No headlights, no tach lights nor does the start button work.
I decided to try a kick start and the headlights and tach lights start to work but the push start still isnt working.
Anyone have any idea of why the push start isn't working still. Ill be checking for pinched wires but curious if anyone has an idea of the best place to start. Whether it be working my way from the battery to the assembly or vice versa. The battery is also reading a normal charge.
might seem like another dumb question but would I need to sand the the paint in all 4 areas in order to get my connection grounded?
Ok well I decided to sand down the paint on the far right and left circles in the picture above, turn the key and press the push start and still nothing happens. No headlights, no tach lights nor does the start button work.
I decided to try a kick start and the headlights and tach lights start to work but the push start still isnt working.
Anyone have any idea of why the push start isn't working still. Ill be checking for pinched wires but curious if anyone has an idea of the best place to start. Whether it be working my way from the battery to the assembly or vice versa. The battery is also reading a normal charge.