New cafe project, need cb350 parts!!!

[legendofjessica]

Hey everyone! I'm working on my first project, a '69 cb350! I'm taking this rust bucket apart and finding I have a huge list of things I need. I figured I would start by asking you all if you have anything you'd like to sell or give away!! I'm located in So Cal!

Main things I currently need:
-Cables: Clutch, Throttle, and front brake lines
-Front brake caliper
-Shift lever
-Rear brake lever and connecting rod
-33mm clip on bars
-Exhaust

Shoot me a message!! Thanks guys.

 

[danker16]

any cables and brake lines should be purchased brand new, you dont want rusty old frayed clutch cables that could snap any moment. and same could be said about old brake lines

 

[ronnie]

Re: New cafe project, need cb350 parts!!!

I have two pair of clip-ons in that diameter at the house, one set is from DCC and the other are adjustable cheapos from eBay. I also have some old mufflers from a 350f that probably just need a good cleaning and polishing. I can get pictures now if you need them, but I work on a ship and won't get back home till thanksgiving if you want anything and you can wait.

 

[ronnie]

Re: New cafe project, need cb350 parts!!!

Also, I have SS brake lines for clip-ons too, brand new, won't fit the 350f I have because I decided to stay stock.

 

[legendofjessica]

Re: New cafe project, need cb350 parts!!!

I have two pair of clip-ons in that diameter at the house, one set is from DCC and the other are adjustable cheapos from eBay. I also have some old mufflers from a 350f that probably just need a good cleaning and polishing. I can get pictures now if you need them, but I work on a ship and won't get back home till thanksgiving if you want anything and you can wait.

I might end up needing them sooner, but if not I'll definitely send you a message! Thank you

 

[legendofjessica]

any cables and brake lines should be purchased brand new, you dont want rusty old frayed clutch cables that could snap any moment. and same could be said about old brake lines

Good to know. I'm brand new with all of this, so I appreciate the info. Thanks!

 

[socalmike_cb72]

Hey if Jess doesn't take the SS brake line, I may have to inquire about it!

 

[MotoMadness]

Welcome aboard. Let e see what I have laying around. I have a ton of CB350 parts

 

[ronnie]

Re: Re: New cafe project, need cb350 parts!!!

Hey if Jess doesn't take the SS brake line, I may have to inquire about it!

Will do.

 

[VonYinzer]

Are you sure you need 33mm clip-ons and not 30mm?

 

[HerrDeacon]

Not near my 350 at the moment to measure, but I believe all CB350K models are 33mm.

 

[VonYinzer]

You're right. Its been a min since I've had one in front of me.

 

[ronnie]

Re: New cafe project, need cb350 parts!!!

Von, I believe she has a different front end on there, she has disc brake up front which someone pointed out didn't come on a 69 350.. I know my 350f has 33mm forks, so if it's a newer model 350 fork it's probably the same diameter.

 

[VonYinzer]

The last year (73) cb350 had a disk. Same front end as your 350four I believe.