New member from Illinois

[Holland]

Hi guys, been riding atvs and bikes since I was 4 years old. Started my first build a few weeks ago. Street is not my passion as I am more of an off road guy but I wanted a neat little bike to bounce around town.

The bike how she sits now. Tires will be in today and then she will head to a buddys body shop for paint. (I can fabricate, but im no painter!)

Bike build here http://www.dotheton.com/forum/index.php?topic=63816.0

My offroad fun! (my truck, trailer, and 2014 Honda Pioneer. Back machine is my buddys 2014 Yamaha Viking)

 

[xb33bsa]

the pods and short exhaust is a big mistake you will never get it running even close to right :'(
be sure and check where the rear tire is at full bump and leave an inch of clearance to the seat pan and hoop
this allows you to someday use some good shocks which will have more travel than stock

 

[Holland]

I'm a full time mechanic, she's dialed in. I even took it to our other shop the other day and ran it around.


Sent from my iPhone using Tapatalk

 

[xb33bsa]

I'm a full time mechanic, she's dialed in. I even took it to our other shop the other day and ran it around.


Sent from my iPhone using Tapatalk

you must be a magician you should post up what mods were performed on the carbs

 

[Holland]

I am a magician, and a magician never reveals his secrets


Sent from my iPhone using Tapatalk