Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hello all. Just started my first Cafe project out of a Honda CB750. Excited to find this site, loads of good info. I am starting to post videos to YouTube on various how to's as I build this project. I'm calling it Sully's Garage. I am only doing this for fun so bear with me. My first topic will be up soon on polishing aluminum. The vid is ok, hopefully I'll get better as I go. I've build a few bikes (This is my first cafe) so I know a few things. Feel free to tell me if you have a better way to do something (I'd love to know as I am learning too, I do not claim to be an expert.) Or let me know if there is a process you would like me to tape. My second episode which I have yet to edit is putting knee bends into a tank... Anyway, Let me know what you think and I look forward to learning something. I'll put the link here as soon as it is available. By the way, Where would be the best place on this site to post these?
Here's the link. My first critique would be to make these shorter. Too much fluff. I'll work on it.
http://www.youtube.com/watch?v=R97Q1kLIdhQ
Greetings!! Nice choice of bike to build. We must all bow down to the 750 Gods!! Lots of small bikes here..... but also lots of tall people who can't ride tiny bikes. I had a CB350F and a CB400F. Way to small for me. I had to use the passenger pegs while riding or I would get cramps in my legs. The only thing I need for my 750 is rear sets. I have acquired a set from a buddy I just need to start playing around with them to try and mount. Anyways...... have fun.
HEY DID YOU REBUILD YOUR CARBS I don't know what year you have I have a set of carbs off an 80 cb750 with the vacum assist. I need o rings for the linkage. leaking fuel out of the two left carbs at the t connection. do you know where to get some?
Kudos on your buildup videos! Like you said there's a bit of fluf in there but it's kinda OK b/c it's your first video... get to know the host kinda thing.
Anyway keep it up and keep posting your vids! DIY is what this place is all about!
... Who knows, if they become a regular bit Noel or TinTin might just make you sticky. 8)
HEY DID YOU REBUILD YOUR CARBS I don't know what year you have I have a set of carbs off an 80 cb750 with the vacum assist. I need o rings for the linkage. leaking fuel out of the two left carbs at the t connection. do you know where to get some?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.