Not sure whats wrong, one pipe popping

Keogan

CB200T, MB5
I'm not sure how to explain the problem, it may be bigger than I want to hear and it may warrant a video.

So when I start my CB200T it soundsfine, but the right pipe is kind of small backfiring, or popping, and has a little smoke. I ran it for 15 miles or so the other day and it ran great, but its just that little unhealthy sound in the right pipe/side that is bothering me. I cleaned the carbs and replaced the gaskets so that isn't it (I hope)

Any advice?
 
Adjust your valves. Adjust the points. Make SURE your carbs are functioning properly, and the bike is timed correctly. Popping and smoke can be a sign of a lean cyinder, which can be VERY bad. Does it do it all the time, or does it stop once the bike is warmed up?
 
It does it pretty much all the time, even when warmed up, does anyone have a cb200t repair manual where I can learn how to adjust the points? and timing?
 
Along with all the other suggestions, check the carb handlers for cracks. Also could be an exhaust leak. My CL350 did that and after adjusting everything until I was blue in the face, it turned out both of those things we're the culprit in my case.
 
Back
Top Bottom