VelociRaider
New Member
Hey everyone - first post here. My bro-in-law and I are working on getting a stock 1974 Honda CB200 up and running. Since the bike has sat for over ten years, we decided to take a few precautions before just trying to start it up.
We removed the two spark plugs and injected 20ML of PB blaster into each cylinder head to let it sit for a week. We then got anxious and changed the oil…and realized last night that the extra PB blaster is probably draining down into our nice, clean oil.
So here's the question - can we just run the bike with 40ML of PB blaster mixed in with the oil or should we change the oil again before attempting to start it up. I know Marvel Mystery Oil can be mixed with oil as an additive - but is PB blaster safe to do so as well? Thanks!
Patrick
We removed the two spark plugs and injected 20ML of PB blaster into each cylinder head to let it sit for a week. We then got anxious and changed the oil…and realized last night that the extra PB blaster is probably draining down into our nice, clean oil.
So here's the question - can we just run the bike with 40ML of PB blaster mixed in with the oil or should we change the oil again before attempting to start it up. I know Marvel Mystery Oil can be mixed with oil as an additive - but is PB blaster safe to do so as well? Thanks!
Patrick