Options for lightweight front rotor/disc's.

[Gumper]

I'm trying to source a new lightweight front disc for my project. Looking for something about 290-320mm, alloy centre and 5 hole fitting in a relatively tight circumference. Vented preferred but not wavey.

My offset is about 26mm but I'll need to make an adapter so something fairly flat is prefered.

Any ideas.

 

[doc_rot]

budget? ISR does custom discs for about $300 a pop. these have 30mm offset.

 

[crazypj]

You can have rotors drilled and thinned down for about $50.00 each, guy on SOHC4 does them

 

[Gumper]

budget? ISR does custom discs for about $300 a pop. these have 30mm offset.

I don't suppose you weighed these before fitting did you?

 

[doc_rot]

Sorry, I did not. I can assure you they are VERY light. EBC makes rotors for the old KZ's that look very similar for $200 a pop as well. part of there "pro lite" series

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Brake+Rotor+KZ900%2f1000+Left+Fr&item=LAMD4076LS

 

[Gumper]

I've sent ISR my requirements.......I'll see what their price is. Although they have a PDF price list on their site and by my reckoning it looks competitive.

Also I managed to land a Brembo Oro series disc, new from the outlet of a well known UK company.....half price. It's from a ZX6R, 320mm zero offset. I have 14 days to return it if need be.


Cheers.

 

[crazypj]

Just get a spacer made to mount it to hub. You know the offset you want so it shouldn't be too expensive