Imola Honda
New Member
Anyone running PAMCO Ignition on their CB450? Install looks pretty easy and I can run my factory coils till I get they coin for new ones.
http://www.cb450ignition.com/
http://www.cb450ignition.com/
PAMCO Ignition CB450
- Thread starter Imola Honda
- Start date
Flugtechnik
My bike is not transportation, it is a respite
I have one but it has not been properly installed yet. If you are at barber you will see it installed and running.
I originally got one awhile ago, but couldn't get it to work. Tried everything. Sent it back to Pete and he sent me a new one. I got it after my wreck so I just hooked it up temporarily to make sure it worked and it ran well for the 10 seconds I ran it.
There has been a lot of discussion on it over at Hondatwins. Pretty positive feedback for the 450s I know DJElliot likes them on his 350s.
END OF LINE
I originally got one awhile ago, but couldn't get it to work. Tried everything. Sent it back to Pete and he sent me a new one. I got it after my wreck so I just hooked it up temporarily to make sure it worked and it ran well for the 10 seconds I ran it.
There has been a lot of discussion on it over at Hondatwins. Pretty positive feedback for the 450s I know DJElliot likes them on his 350s.
END OF LINE
I got one of the new 350 Pamcos with the redesigned rotor and it was working great before I took the bike apart 
A friend of mine has a Charliesplace electronic ignition for his 175 and had great luck with that so far as well.
Points are REALLY an unnecessary pain once you see how easy these ignitions are!
A friend of mine has a Charliesplace electronic ignition for his 175 and had great luck with that so far as well.
Points are REALLY an unnecessary pain once you see how easy these ignitions are!
Imola Honda
New Member
Flugtechnik said:
If I'm at barber???
Flugtechnik
My bike is not transportation, it is a respite
We will be installing the pamco unit in my bike at the DTT bike build at Barber.
END OF LINE
END OF LINE
Hey "iContango",
Since you have access to both, can you offer any comparison between the "PAMCO" and the "Charlie's Place" units? I'd like to know what you think of their quality, design, features, etc., for the relative price difference, between the two brands.
Thanks for any input.
Jeff
Since you have access to both, can you offer any comparison between the "PAMCO" and the "Charlie's Place" units? I'd like to know what you think of their quality, design, features, etc., for the relative price difference, between the two brands.
Thanks for any input.
Jeff
joshrandall07
New Member
If anyone has contacts with Pamco or Pete please let him know i am trying multiple times to get in touch with him. joshrandall07@gmail.com
