Parting out a CB350

jcollinsia

New Member
Hey guys. I recently picked up a 72CB350 that i intended to rebuild but decided to go for a larger bike instead. So now I decided to part the little guy out. Let me know if there is anything that you guys need/want. I'm going to throw a few parts up on ebay but whatever I dont get rid of is going to the scrapyard. Here's some pics for y'all. The motor is seized and there is no title but there are still a lot of good bits on her.

IMG00166201102031324-vi.jpg


IMG00169201102031326-vi.jpg


IMG00170201102031326-vi.jpg





IMG00175201102040544-vi.jpg


IMG00179201102040544-vi.jpg
 
Would you be willing to pull the Yoke off the forks? Mine is cracked and probably unsafe to ride with.
 
Hey Andrew. Both levers are bent but I'll take a pic after work tonight of the whole assembly and just let me know if any of it will work.

imseamless, I'll take a look after work to make sure that they're in good shape but I dont think it should be a problem. Are you wanting just the top piece or the whole assembly?
 
how much for the gauges, and if the carbs dont sell, how much. where are you located. if close to tampa FL i will take the motor too. how much for it. thanks
 
Back
Top Bottom