pods don't fit (cause i made a mistake)

[eran_k]

I modified the frame allot but made a small calculation error and now a standard uni pod filter (3" length) doesn't fit behind my carbs - well it can fit if i squeeze the end a little.
is there a decent filter that's about 2.5" long and fits over a 2" throat?
what other options do i have?

Thanks
Eran

 

[trippmann]

post pictures so we know exactly what youre talking about.

 

[SONICJK]

Uni makes short filters.

 

[eran_k]

Here's a pic. hope it's clear.

The distance between the carb ,mouth and the edge of the "box" is roughly 70 mm.

 

[VonYinzer]

Get the UNI foam filters. They'll flex enough to clear the frame.

 

[eran_k]

well the frame is not the problem. it's that box i made under the seat.
i tried a uni and if i squeeze it a bit it will fit, but will it cause any problem that the filter is squeezed?

 

[VonYinzer]

No. As long ad you don't restrict flow you'll be fine.