Post a pic of your latest purchase

20130518_160218.jpg


$75
 
socalmike_cb72 said:
Right now it's out of gas. Previous owner forgot to give me the keys to the tank, and silly me was too excited to even think about it at the time. Should be getting on Monday.

If it's like any other CB750 any key will do or a flat blade screwdriver
 
Friend used to use them on his drag bikes, says fueling isn't very accurate for street use, even with the 'boost' jetting
They are going on a two stroke?
 
crazypj said:
Friend used to use them on his drag bikes, says fueling isn't very accurate for street use, even with the 'boost' jetting
They are going on a two stroke?

Other reputable builders/tuners have gotten 34mm powerjet Lectrons running very well on street-driven XS650's like mine. I get the impression that many people give up on them before taking the time to get them completely tuned. I obviously have a ways to go, but they're not particularly more ornery than my VM34's were when I was first figuring out a baseline for them. So far, even running rich and poorly with crappy idle, they rage hard above 4k rpm. I have other metering rods (on order) to try, but so far the power, sound, and pure sex-appeal are keeping me from retreating back to Mikuniland.
 
VonYinzer said:
Between Brad and yourself, it's like an alien movie where all of the two strokes on the continent are slowly migrating to the mothership located between brads garage and your dining room.
 
stroker crazy said:
Ready for some rewiring:

item.JPG


Very impressed with the quality of the crimper!

Crazy

I have the same set, also ordered some Extra 3.5mm bullets...The guy who runs ut (Del) refunded me $1.00 because the shipping was less then his charge. Real stand-up vendor.
 
clem said:
Between Brad and yourself, it's like an alien movie where all of the two strokes on the continent are slowly migrating to the mothership located between brads garage and your dining room.

I'm trying my damndest. Haha. Once I have a whole day off, I'm headed to Cleveland to grab another T250 from DJElliott as well. I REALLY want a DT360 to restore. Maybe this winter I can find a cheap one.
 
I saw these grips online and I had to buy them. Seriously.... I had no choice.
 

Attachments

  • DSCF3335.JPG
    DSCF3335.JPG
    414.8 KB · Views: 198
Back
Top Bottom