Post a pic of your latest purchase

[sinjinle]

Not without some modification, although ALLBALLZ are now doing a pic-n-mix on bearings so that may be the easy bit.
I got a set of 95 Ninja (250?) 36mm forks to go on one of mine, need re-building but tubes ain't rusty so not a problem.
I'm going to switch out stem and make a new top yoke, when I get reound to it :

so all i need is to pick up this?
http://www.allballsracing.com/99-3520-5.html

 

[shotgun]

Picked up this NOS tank for my GSX build off ebay today for about $240 shipped, not the best deal in the world, but certainly not the worst either.

 

[IndieSol]

Gauges & headlight ears from Dime City~

I also installed my new tsubaki o-ring chain today but didn't take a pic. I have some problems with the gauges so look for my post in 1-800-cafe-help.

I got those same gauges. The tach was a bit disappointing, eh ?

 

[beachcomber]

Just scored another TR1 to use as a donor for my Cafe Racer. 8)

This one is mint - one owner from new and well under 30K miles. Been in his garage for ages due to a hip injury.

The great thing is I now have a bike to ride through the summer , and when I begin the conversion I'll have all the parts to hand and will get the purchase price back from the sale of the unwanted parts - exhaust, lights, mudguards, panels, etc.,etc.

 

[Redbird]

Scored for the Stepside.
03 Yukon console/jumpseat... $20 (needs a lid)
'98 Corvette Leather seats... Freebie (just gotta donate some time at my buddies racecar/restomod shop)

 

[HerrDeacon]

Picked up a POS MB5 today, really rough shape and missing parts, but just had to have it, always loved them. Finally have a two-stroke. ;D Expect a build thread in the future but unsure as of yet if I'll be doing a full restore or more of a cafe style.

 

[Blake]

Gibson Les Paul Tribute model. Gold top, '60s neck. Nitro finish. Limited run from Nashville. Built on 6/11/11, arrived at my house 6/29/11. Talk about factory fresh! GIves me something to mess around with while my leg is in this cast.

 

[Rocan]

nice gibson!

and that MB5... MMMM... wanted one ever since I read an article about how "limited" honda made that little motor... they can get some serious pep with some good work put into them.

 

[tWistedWheelz]

Sweet axe blake! I have always loved the sound of a screaming Les Paul plugged into a Marshall double stack!

Redbird! Great score man, I bet the stepside will be happy with that upgrade, and so will your ass! Will we seee you back at Barber this year?

 

[Redbird]

I'm planning on Barber, but not 100% yet.

 

[Rimmy]

Velocity stacks from DCC for the 350, and a new tail-light for the 125. I can finally start working on the seat for the 125 now!

-jordan

 

[DrJ]

1999 Merlin Odyssey. I love titanium bicycles.

 

[dirtbag]

Cheese cake bitches.

 

[Rocan]

mmmm those V stacks are pretty...

and that merlin? fucking LOVE that frame. got a chance to ride that exact frame a few months back. feels great!

 

[johngofast]

Just picked up this '73 Yamaha AT1 125cc. Going to build a really low cafe I think.

"Burnin' oil and smellin' royal!"

 

[stik70]

I went to an auction today and scored this aluminum tank, 5 1/4" dia ;D , which fits in that tiny space behind the backbone of a Triumph.
KeV

 

[Blake]

Velocity stacks from DCC for the 350, and a new tail-light for the 125. I can finally start working on the seat for the 125 now!

-jordan

I have that same light on my 500 Twin. Mounted it upside down beneath the seat. Used the tag holes to screw it into the bas of the seat.

 

[Redbird]

17" front wheel for the KLR Motard project. It's a conversion using a front wheel hub, a rear wheel hoop, and aftermarket spokes to lace them together.

It also came with 50% of another '87 KLR650. Only missing bodywork, seat, and wheels. No pic though.

$100

 

[Rocan]

damn good deal redbird!

 

[VonYinzer]

I went to an auction today and scored this aluminum tank, 5 1/4" dia ;D , which fits in that tiny space behind the backbone of a Triumph.
KeV

Hell ya! Thats killer looking Kev.