Post a pic of your latest purchase

After making a mess of too many screw heads, I bought an impact driver.

impactdriver.JPG


This thing is amazing. Why did I wait so long? Because I'm stupid.

Damian.
 
I picked up a Unicorn brand impact on Ebay last Summer. Thing was awesome. Until the blasted bit fused into the handle. I've tried everything from Kroil, to a torch, to a vice and hammer. Nada zip zilch. Love to know if yours lasts...
 
Killman77 said:
I picked up a Unicorn brand impact on Ebay last Summer. Thing was awesome. Until the blasted bit fused into the handle. I've tried everything from Kroil, to a torch, to a vice and hammer. Nada zip zilch. Love to know if yours lasts...
Click to expand...

I bought a cheap one at NAPA years ago, use it regularly, works great.
 
Ive beat the hell outta my mac brand driver for going on 10 years now with no signs of stopping, 25 bucks well spent
 
bradj said:
Ive beat the hell outta my mac brand driver for going on 10 years now with no signs of stopping, 25 bucks well spent
Click to expand...

I've got a Lisle branded one that should be dead by now. Still kickin'!

image-3-impact-driver.jpg
 
got a couple more bikes
 

Attachments

  • 1236972_4707000931215_48779429_n.jpg
    1236972_4707000931215_48779429_n.jpg
    90.7 KB · Views: 690
  • 1240643_4730262752746_553745472_n.jpg
    1240643_4730262752746_553745472_n.jpg
    110.6 KB · Views: 848
lovin' the bars on that 360, just what i'm looking for when i get my 750 in (hopefully ) a few weeks
 
lingo said:
once it gets here i will get scanned and get you the files. thanks tim
Click to expand...

I don't suppose this is it? There is a Honda Carb manual floating around the interwebs that I found a long time ago.

http://198.57.59.10/manuals/MISC/Carburetion1975.pdf
 
Tim said:
Stoked to have won this old spotlight supposedly taken off a vintage fire truck. It's going on the bow of my 1957 FeatherCraft when it's ready for the water.

$15! Seriously. Hoping it's stainless steel - I'm sort of assuming it is, and that it's designed for the elements, given it was on a fire truck.

http://www.ebay.com/itm/Unity-model-S6-spot-lamp-light-rat-hot-street-rod-custom-wooden-boat-fire-truck-/130988624083
Click to expand...

I can't say about the housing, it's either AL or brushed stainless. But that bezel is chrome, looks like those "pit" marks on it. But you will be using it around fresh water I assume? And your up in mountain country, so humidity is relatively low. I think you will be alright, if not get it powdered. Will definitely look nice on the skiff. Make sure you have all of your proper navigation lights on there! (I'm a seaman, so I had to mention it!)
 
Not a motorcycle but might have another one here by the end of the week. Had to pick up a new rig because I can't fit much in the back of the MINI very well. This fit what I wanted (minus the wheels) plus has the 5.3L V8.

9803385933_f6340a51ee_z.jpg
 
Tim said:
When you've scanned it, I can host the file. I'm assuming you didn't buy it from Honda, so whoever is selling it is already copying it. Likely in the 'public domain' at this point anyhow so I don't feel bad copying it and making it available.
Click to expand...
I picked up a copied BSA service manual a while back off ebay and thought about sharing.... but by the time I scan each page the file will be HUGE!

oh and my impact driver is a Lisle as well... hasn't failed me yet.
 
Got some reading material in preparation for my EFI conversion on my 360.
 

Attachments

  • DSCF3686.JPG
    DSCF3686.JPG
    373.7 KB · Views: 565
When disassembling my current project, two bolts broke. So I bought a set of screw extractors or "easy outs".

screwextractor.jpg


Damian.
 
Crusader, something looks "off" about your carbs. Can you take a picture from each side of the bike, focusing on the carbs?

Personally, that tank looks so good I wouldn't put any decals on it.
 
damiansd said:
When disassembling my current project, two bolts broke. So I bought a set of screw extractors or "easy outs".

screwextractor.jpg


Damian.
Click to expand...

I hate those things, if they work, you didn't need them, when they snap they suck to remove
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom