stubsryan
Been Around the Block
So I worked out the rear axle is likely for a cb200 as that’s what the rear hub is. I’ve got a 22mm stepped down to 15mm axle that came in the box of tricks. I’ve welded up the 15mm section so it could get machined to 17mm. The bloke has done that but can’t do the thread on the lathe for some reason. I suspect he doesn’t know so now I have to get another machinist to sort it out. What a drama for a bloody axle!
Sent from my iPhone using DO THE TON
Sent from my iPhone using DO THE TON